New product from Tie Down Engineering! G5 Stainless Steel Disc Brake has the following features:
*All Aluminum Caliper: 380 series, sheds heat 5x faster than cast iron calipers *Ceramic Pads: floating ceramic pads with stainless steel backing plates. Improved wear over organic pads. *Stainless Steel Rotor with Venting Holes: new laser cut venting holes assist in faster cooling *Slim Design: allows short axle overhangs and provides direct brake line routing back to the axle *Bi-metal Piston: combines stainless steel outer piston with an aluminum inner sleeve to shed braking heat fast. The stainless steel outer piston wil not rust or corrode. *Oversize Rubber Boot: 50% thicker by design to provide a positive and faster piston withdrawl *Rotating Swivel Connector: Swivel brake line connector allows for convenient brake line placement *Stainless Steel Caliper Pins with Oil Impregnated Bronze Bushings: Allows caliper to float freely and ensures proper alignment during installation and will not rust or corrode. *Vented Caliper Housing: Improves heat dissipation and decreases pad wear. *One Piece Stainless Steel Bleeder Valve with Teflon Coating: Will not corrode and allows for easier bleeding of the brake system. *Square O-ring with Slant Edge: Helps retract pistons away from the rotor when fluid pressure is released. Provides better protection from contamination of brake fluid.
Kit is for one wheel. Rotor diameter: 11.75", Replaces Drum Diameter: 12", Bearing Size: 1-1/4" & 1 3/4" (Bearings included), # of studs:6, Bolt Circle: 5-1/2" (for 14" and 15" wheels), Axle Rating: 6000 lbs.