You are here: Home > Axles
Sort By:
Page of 1
SPINDLE TANG WASHER 1" ID Flat Spindle Washer Shackle Link 1.5" x 5.188"
SPINDLE TANG WASHER
Our Price: $0.95
Tang washer with 1" ID 1" ID Flat Spindle Washer

Galvanized 1.5 x 5.188 shackle link



Spindle Castle Nut 1" ,0.99" Axle Tie Plate 5 Hole Galvanized 3" x 3 7/16" Axle Tie Plate Kit for 2 3/8" Round Tube Axles
Spindle Castle Nut with 1" OD Used on Venture Trailers VB-1000, VB-1300, VW-1200 and VAW-1200's. Axle size is 1.69". Spring Width 2". U-bolt size 3/8". See drawing for additional measurements. One kit supplies all necessary hardware to mount two leaf springs on one trailer axle.
Kit includes: (4) U-bolts (1/2" x 2 3/8" x5 3/8" plated finish), (8) lock nuts and (2) axle tie plates (galvanized finish). Spring width 1 3/4"
Axle Tie Plate Kit for 2"x2" Square Tube Axles SPINDLE FOR TORSION AXLE 1750lb. Torsion Axles Spindle Arm UCF FlexiRide Axles 3500lb.
One kit supplies all necessary hardware to mount two leaf springs on one trailer axle.
Kit includes: (4) U-bolts (1/2" x 2" x5 3/8" plated finish), (8) lock nuts and (2) axle tie plates (galvanized finish). Spring width 1 3/4"
For use with Eliminator torsion axles that use removable spindles with Super Lube. The Super Lube system provides for greater extended bearing life by thoroughly distributing grease throughout the hub cavity and eliminates the need to disassemble the hubs and repacking the wheel bearings. Bearing size: 1 3/8" x 1 1/16". Capacity: 1,750 lbs. *Includes castle nut, flat washer and cotter pin Torsion axle spindle arm with lubricant for UCF Flexiride axles, 3500lb capacity. UCF part number FA-35E w/ lube. Used with 1 1/16" & 1 3/8" bearings.
AXLE 1700lb. CAPACITY- galvanized, 1.5" O.D. square tube AXLE 1700lb. CAPACITY- galvanized, 1.5" O.D. square tube with 4 Bolt Hub Assemblies AXLE 2200lb. CAPACITY- galvanized, 2 3/8 O.D. round tube, 76.50" Track
AXLE 1500lb. CAPACITY spring suspension- galvanized, 1.5" O.D. square tube, 50.5"" seal surface, 43" spring centers, 49" tube length. This axle does not come with hubs or brake assemblies. It uses a 1" metric bearing which we sell. The part number for the bearing kit is 100BK. The hub assembly that we assemble on this trailer can also be purchased which includes the hub and bearing kit. The part number is 46199A.  Please verify all measurements on the drawing before ordering to ensure you are ordering the correct axle. If you have any questions in regards to this print please feel free to e-mail us at customerservice@boattrailerpartssuperstore.com. Please note that due to the size and weight of this package additional UPS charges are applied. AXLE 1500lb. CAPACITY spring suspension- galvanized, 1.5" O.D. square tube, 50.5"" seal surface, 43" spring centers, 49" tube length comes assembled with 4 bolt hub assemblies (part number 46199A). Bearing size is 1" METRIC.  Please verify all measurements on the drawing before ordering to ensure you are ordering the correct axle. If you have any questions in regards to this print please feel free to e-mail us at customerservice@boattrailerpartssuperstore.com. Please note that due to the size and weight of this package additional UPS charges are applied. AXLE 2200lb. CAPACITY spring suspension- galvanized, 2 3/8 O.D. round tube, 76.50" Track, 72.875" seal surface, 62" spring centers.
AXLE Spring 3500lb.  CAPACITY, galvanized, 2x2 square tube, 1/4" thick Axle 3500lb Spring straight square tube 89.88" track/72.5" & 75" SC AXLE 3500lb. CAPACITY- galvanized, 2x2 Square Tube 79.125" Track
AXLE Spring 3500lb. CAPACITY- galvanized,2x2 square tube, 1/4" thick, 92.13" track (hub face to hub face), 83.75" tube length, 72" & 75" spring centers. This axle does not come with hubs or brake assemblies. Please verify all measurements on the drawing before ordering to ensure you are ordering the correct axle. If you have any questions in regards to this print please feel free to e-mail us at customerservice@boattrailerpartssuperstore.com. Please note that due to the size and weight of this package additional UPS charges are applied.
Capacity: 3500lbs
Track: 89.88"
Tube Length: 83.23"
Axle Finish: Galvanized
Square Tubing Size: 2" x 2" x 3/16"
Camber: 4 degree (2 per side)
Spring Over/Under: Under

Axle fits 1750# 5 bolt hub assembly with 1 1/16" & 1 3/8" bearings. HUB ASSEMBLIES NOT INCLUDED. Spindles only.
AXLE Spring 3500lb. CAPACITY- galvanized,2x2 square tube, 1/4" thick, 79.125" track (hub face to hub face), 70.75" tube length, 62" spring centers. This axle does not come with hubs or brake assemblies. Please verify all measurements on the drawing before ordering to ensure you are ordering the correct axle. If you have any questions in regards to this print please feel free to e-mail us at customerservice@boattrailerpartssuperstore.com. Please note that due to the size and weight of this package additional UPS charges are applied.
AXLE Spring 4200lb. CAPACITY, galvanized, 2x2 square tube, 1/4" thick-STRAIGHT TUBE Axle 4200lb Spring STRAIGHT square tube 89.88" track/72.5"&75" SC AXLE 2200LB. CAPACITY GALVANIZED with 1750lb. 5 bolt hub assembly
AXLE Spring 4200lb. CAPACITY- galvanized,2x2 square tube, 1/4" thick, 92.125" track (hub face to hub face), 81.63" tube length, 72" & 75" spring centers. This axle does not come with hubs or brake assemblies. Please verify all measurements on the drawing before ordering to ensure you are ordering the correct axle. If you have any questions in regards to this print please feel free to e-mail us at customerservice@boattrailerpartssuperstore.com. Please note that due to the size and weight of this package additional UPS charges are applied
Capacity: 4200lbs
Track: 89.88"
Bent Tube Length:80.60"
Axle Finish: Galvanized
Square Tubing Size: 2" x 2" x 1/4"
Camber: 4 degree (2 per side)
Spring Over/Under: Under
Spring Centers: 72.50" & 75"
Axle fits 3000# 6 bolt hub assembly with 1 1/4" & 1 3/4" bearings. HUB ASSEMBLIES NOT INCLUDED. Spindles only.
AXLE 2200LB. CAPACITY GALVANIZED spring suspension- galvanized, 2 3/8 O.D. round tube, 72.875" seal surface, 62" spring centers with 1750lb. 5 bolt hub assembly.
Axle 4200lb Spring square bend tube 92.125" track/72"&75" SC with 3" center drop Axle 6000lb Spring STRAIGHT square tube 89.88" track/ 72.5"&75" SC AXLE Spring 3500lb. CAPACITY, galvanized, 2x2 square tube, 92.13" track,1/4" thick ASSEMBLED w/ HUBS
Capacity: 4200lbs
Track: 92.125"
Bent Tube Length:82.625"
Axle Finish: Galvanized
Square Tubing Size: 2" x .25"
Camber: 1 degree (1/2 per side)
Spring Over/Under: Under
Spring Centers: 72" & 75"
Center Drop: 3"
Axle fits 3000# 6 bolt hub assembly with 1 1/4" & 1 3/4" bearings. HUB ASSEMBLIES NOT INCLUDED. Spindles only.
Capacity: 6000lbs
Track: 89.88"
Tube Length:80.60"
Axle Finish: Galvanized
Square Tubing Size: 2" x 3" x .25"
Camber: 4 degree (2 per side)
Spring Over/Under: Under
Spring Centers: 72.50" & 75"
Axle fits 3000# 6 bolt hub assembly with 1 1/4" & 1 3/4" bearings. HUB ASSEMBLIES NOT INCLUDED. Spindles only.
AXLE Spring 3500lb. CAPACITY- galvanized,2x2 square tube, 1/4" thick, 92.13" track (hub face to hub face), 83.75" tube length, 72" & 75" spring centers. This axle is assembled with 5 bolt, 1750lb capacity, painted hubs assemblies (includes wheel bearings   1 3/8" & 1 1/16", studs etc.).  Please verify all measurements on the drawing before ordering to ensure you are ordering the correct axle. If you have any questions in regards to this print please feel free to e-mail us at customerservice@boattrailerpartssuperstore.com. Please note that due to the size and weight of this package additional UPS charges are applied.
AXLE 3500lb. CAPACITY- galvanized, 2x2 Square Tube 79.125" Track with 1750lb 5 Bolt Hub Assemblies AXLE Torsion 3500lb. CAPACITY- galvanized,2.63" square tube, 3/16" thick, 82.25 Length,92.62" Track 3750lb Torsion square tube 92" track with 4" center drop
AXLE Spring 3500lb. CAPACITY- galvanized,2x2 square tube, 1/4" thick, 79.125" track (hub face to hub face), 70.75" tube length, 62" spring centers. This axle comes assembled with 5 bolt, 1750lb capacity hub assemblies (painted), 1 3/8" & 1 1/16" bearings and studs. Please verify all measurements on the drawing before ordering to ensure you are ordering the correct axle. If you have any questions in regards to this print please feel free to e-mail us at customerservice@boattrailerpartssuperstore.com. Please note that due to the size and weight of this package additional UPS charges are applied. AXLE Torsion 3500lb. CAPACITY- galvanized,2.63" square tube, 3/16" thick, 92.62" track. This axle does not come with hubs or brake assemblies. Please verify all measurements on the drawing before ordering to ensure you are ordering the correct axle. If you have any questions in regards to this print please feel free to e-mail us at customerservice@boattrailerpartssuperstore.com. Please note that due to the size and weight of this package additional UPS charges are applied.
Capacity: 3750lbs
Track: 92"
Bent Tube Length: 80.48"
Axle Finish: Galvanized
Camber: 1-1.5" per side
Outside to Outside Mounting Brackets Measurement: 80.73"
Inside to Inside Mounting Brackets Measurement: 66.23"
Brake Flange to Brake Flange Measurement: 85.68"
Torsion Arm: 45 degrees (+/- 2 degrees)
Center Drop: 4"
Axle fits 1750# 5 bolt hub assembly with 1 1/16" & 1 3/8" bearings. HUB ASSEMBLIES NOT INCLUDED. Spindles only.
AXLE Spring 3500lb. CAPACITY, galvanized, 2x2 square tube, 1/4" thick ASSEMBLED w/ DISC BRAKES
AXLE Spring 3500lb. CAPACITY- galvanized,2x2 square tube, 1/4" thick, 92.13" track (hub face to hub face), 83.75" tube length, 72" & 75" spring centers. This axle is assembled with 10" Galvx cap over style disc brakes (part number 46261). The advantages of disc brakes are:

* E-Coat finish protects the caliper from salt crystallization.
* Stainless Steel caliper slide pins are easily accessible with 7/16 hex heads for quick removal
* GalvX coated brake pad backing plates further reduce areas susceptible to corrosion
* All aluminum caliper, 380 series alloy, sheds heat five times faster than traditional cast iron calipers
* Compact design allows short axle overhangs and provides direct brake line routing back to the axle
* Oil impregnated bronze bushings last longer and slide smoother
* Oversize rubber boot is 50% thicker by design and provides a more positive piston withdrawal
* Replacement brake pads availalbe at most auto parts stores (use NAPA# TS-7192-M (for 1990 Chevrolet Cavalier) or:     IBN#289 and MXD289)
Always use High-Temp. Marine Bearing Grease with disc brakes due to the higher operating temperatures as compared to drum brakes.

BEARING SIZE: 1-3/8" x 1-1/16"
# OF STUDS: 5
BOLT CIRCLE: 4-1/2" (13" & Larger Wheels)
AXLE RATING: 3500 lbs.  
 
Please verify all measurements on the drawing before ordering to ensure you are ordering the correct axle. If you have any questions in regards to this print please feel free to e-mail us at customerservice@boattrailerpartssuperstore.com. Please note that due to the size and weight of this package additional UPS charges are applied.