|
|
|
|
|
|
Crossmember Bracket for Venture Trailers-3x3 Trailer Frames built in early 2000's
|
Our Price: $5.99
|
|
|
This crossmember bracket was used in conjunction with crossmember part number 43845 which is shown in the pictures above. Used on Venture Trailer models that required a 3x3 trailer frame size. Please verify all measurements before ordering.
|
|
|
|
|
|
|
|
|
|
Crossmember Straight 83" Watercraft Trailers
|
|
Our Price: $99.00
|
|
|
Straight galvanized crossmembers used on Venture Trailer models VW-1500 and VW-2000. Overall length is 83" and it is made out of 8 gauge steel. Please see drawing for exact dimensions.
|
|
|
|
|
|
|
|
|
|
Crossmember 3x3x58.50" 12 gauge with welded flange
|
|
Our Price: $119.00
|
|
|
Light duty hot dipped galvanized crossmember used on Venture Trailer models 2000-2450lbs. The crossmember is 3x3 tube size, 12 gauge material. Overall length is 58.50". Please verify all measurements on the drawing to verify that you are purchasing the correct replacement part for your Venture Trailer.
|
|
|
|
|
|
|
|
|
|
Crossmember 3x3x72" 11 gauge with welded flange
|
|
Our Price: $129.00
|
|
|
Light duty hot dipped galvanized crossmember used on Venture Trailer models 2600 lbs. capacity to 5600lbs. The crossmember is 3x3 tube size, 11 gauge material. Overall length is 72". The flanges are welded on the sides of the crossbar at 3.625" on center.
|
|
|
|
|
|
|
|
|
|
Crossmember 3x3x72" 9 gauge with welded flange
|
|
Our Price: $139.00
|
|
|
Heavy duty hot dipped galvanized crossmember used on Venture Trailer models 5800 lbs. capacity and above. The crossmember is 3x3 tube size, 9 gauge material. Overall length is 72". The flanges are welded on the sides of the crossbar at 3.625" on center.
|
|
|
|
|
|
|
|
|
|
Crossmember 3x3x74" 9 gauge
|
|
Our Price: $179.00
|
|
|
Heavy duty hot dipped galvanized crossmember used on Venture Trailer models 7400 lbs. capacity and above usually on trailers manufactured between 1992-1996. The crossmember is 3x3 tube size, 9 gauge material. Overall length is 74". Crossmember used to come with two welded tabs used for a 12" keel roller however due to its obsolete status we were only able to get it in a modified version as shown above which will NOT have the tabs for a keel roller.
|
|
|
|
