You are here: Home > Lights & Light Brackets > Plug & Play Incandescent Lights
Sort By:
Page of 1
Clearance/Marker Light Red Incandescent Stud- mount side marker light 0.180" molded connector Clearance/Marker Light Amber Incandescent Stud- mount side marker light 0.180" molded connector Submersible Tail Light Over 80" {Right} Incandescent  w/ molded 2 pole con.
Clearance/Marker Light RED Incandecent Stud- mount side marker light. Lens welded with housing; stainless steel bracket and mounting stud as ground when mount on trailer frame or metal surface. 18" brown lead wire with 0.180" molded male connector. Black housing and stainless steel base.

Dimensions: L 2 1/8" x W 1" x H 1 1/8".
Clearance/Marker Light Amber Incandecent Stud- mount side marker light. Lens welded with housing; stainless steel bracket and mounting stud as ground when mount on trailer frame or metal surface. 18" brown lead wire with 0.180" molded male connector. Black housing and stainless steel base.

Dimensions: L 2 1/8" x W 1" x H 1 1/8".
Over 80" submersible combination RIGHT hand tail light. Includes the following functions: stop, turn, tail, rear reflex, side marker, and side reflex. Mounts on 2" centers and includes mounting hardware. These lights meet FMVSS/CMVSS 108 requirements. Lens retained screw in front for easy maintenance and bulb replacement. Rubber seal installed for waterproof function. 1-1/4" mounting stud included for installation. 12" brown/green lead wire with 2 pole molded connector. 12" white ground wire with ring ground terminal.

Dimensions: L 7 7/8"xW 2 3/4"xH 2 7/8"

*right hand indicates standing from the rear of your trailer
Submersible Tail Light Over 80" {Left} Incandescent  w/ molded 2 pole con. Light 3-Light Bar {with ARC} Incandescent Submersible stainless steel identification light bar for over- 80'' application. Light 3-Light Bar {straight bar} Incandescent Submersible stainless steel identification light bar for over- 80'' application.
Over 80" submersible combination LEFT hand tail light. Includes the following functions: stop, turn, tail, rear reflex, side marker, side reflex, and license light. Mounts on 2" centers and includes mounting hardware. These lights meet FMVSS/CMVSS 108 requirements. Lens retained screw in front for easy maintenance and bulb replacement. Rubber seal installed for waterproof. 1-1/4" mounting stud included for installation. 12" brown/yellow lead wire with 2 pole molded connector. 12" white ground wire with ring ground terminal.

Dimensions: L 7 7/8"xW 2 3/4"xH 2 7/8"

*LEFT hand indicates standing from the rear of your trailer

Light 3-Light Bar with Arc Incandescent Submersible stainless steel identification light bar for over- 80'' application. Dimensions: L 13 1/4". Mounting holes are 7 3/4" on center. Completely sealed light design with 60" brown lead wire with one pole 0.180" molding connector. Completely sealed light design with 60" brown lead wire with one pole 0.180" molding connector. 8-1/2" mounting hole allow ground through mounting hardware.